Equipment & Accessories

Products / Hydra-Lift Cranes / Hydra-Lift Truck-Mounted Cranes - Optional Equipment / Equipment & Accessories

Weldco Hydra-Lift offers a variety of Equipment & Accessories including: Work Lift Packages, Rooster Sheaves, Crane Blocks, and more:

WORK LIGHT PACKAGES

HL 30, WHL 23 CRANE

This work light package has four LED floodlights mounted on a light bar at the tip end of the outer boom. Wiring is enclosed in steel conduit welded to the cab side of the boom. Lights are controlled by a switch on the control console.

WHL 40, 45 AND 50 CRANES

These work light packages have eight LED floodlights. Four are mounted on a light bar at the tip end of the outer boom, wiring is enclosed in steel conduit bolted to the cab side of the boom. Two lights are mounted on the front of the cab, below the windshield. Two more are mounted on the rear of the cab, just below the roof line. The boom mounted lights are controlled by a rocker switch and the four cab mounted lights are controlled by a second rocker switch. Both switches are on the control panel in the cab.

Equipment & Accessories

Equipment & Accessories

ROOSTER SHEAVES

ROOSTER SHEAVE ASSEMBLY

The rooster sheave is a pin-on rigging accessory with a composite sheave identical to the boom tip sheaves. It is required if rigging more than six parts of line, or when an auxiliary winch is used. A second ATB transmitter can easily be bolted to it when used with an auxiliary winch. It is a complete install kit with easily removable pins.

AUXILIARY WINCH OPTION WITH ROOSTER SHEAVE

This option gives the operator a second winch to operate as a tag line. The second winch is a 12,000 lb single speed unit, mounted directly behind the main winch. A down haul ball is included.

 

  Equipment & Accessories

CRANE BLOCKS

30 TON CRANE BLOCK – Triple Sheave Block

  • 30 Ton working load limit
  • Approximate Weight: 444 lbs
  • Enables our cranes to be rigged with up to 6 parts of line
  • Optional rooster sheave, up to 7 parts of line can be rigged.

25 TON CRANE BLOCK – Double Sheave Block

20 TON CRANE BLOCK – Double Sheave Block

4o TON CRANE BLOCK – Four Sheave, Easy Reeve Hook Block

 

 JIBS

  • 21’ SWING AROUND JIB – Single Stage (HL 30 CRANES)

  • 26’ SWING AROUND JIB – Single Stage (WHL 23, WHL 35, WHL 40 CRANES)

  • 26’/45’ SWING AROUND JIB – Two Stage (WHL 23, WHL 35, WHL 40 CRANES)

  • 31’ (0,15,30°) SWING AROUND JIB INSTALLED – Single Stage (WHL45, WHL 50 Cranes)

HYDRAULIC OIL HEATER/COOLER

HYDRAULIC OIL HEATER

A 15 tube stainless steel heat exchanger is installed in the hydraulic tank. Heat from the truck’s cooling system is used to pre-heat the hydraulic oil during cold weather operation.

HYDRAULIC OIL COOLER

This option is a must have for any crane that will be using its hydraulic system without cool down periods, such as continuous operation of a pile driver or a concrete ladle. The oil cooler is mounted on the curb side of the turret and features twin electric fans which are automatically controlled with a thermostat set to engage at 140° F. The fans can also be manually controlled with a rocker switch, located inside the cab, to operate at temperatures below 140°. Return oil from all the control valves flows through the cooler before returning to the oil reservoir. The cooler is equipped with a 60 psi bypass relief valve for internal protection.

 

  Equipment & Accessories

PLATFORMS

TWO MAN WORK PLATFORM

This self leveling work platform adds versatility to a crane by converting it into an elevating platform for accomplishing work that would normally require an aerial device. Installation is simple, requiring only one or two pins.

  Equipment & Accessories

WHL 4500 PILE DRIVER

Quickly and easily convert your Weldco Hydra-Lift crane application into a pile driver application and vice versa, onsite. The addition of a pile driving hydraulic circuit with heavy duty quick couplers for pressure, return, and case drain, facilitates this quick field conversion of the WHL crane. 55.5 ft leads easily accept 40 ft lengths of standard piling material. Read more about WHL Pile Driver »  

*Due to the highly customizable nature of our products, some of the images shown on our website may not depict our standard offerings.
Your heavy equipment dealer or WBM representative can provide details and related specifications for all of our products.

Request a Quote
Call Now